The PS1220 is designed as a 14.2V D.C/20A battery charger and battery charge state monitor. The charger first applies a fast charge to bring the battery up to nominal capacity and then applies a trickle charge to maintain that state.
The PPS15 is a 13.8 volt 15amp transformer isolated switch mode down converter designed to be used either as a stand alone supply or as a float style battery backed up supply when a lead acid battery is connected to its battery terminals.
The PPS20 is a 13.8 volt 20amp transformer isolated switch mode down converter designed to be used either as a stand alone supply or as a float style battery backed up supply when a lead acid battery is connected to its battery terminals.
The PS1240 is designed as a 14.2V D.C/40A battery charger and battery charge state monitor. The charger first applies a fast charge to bring the battery up to nominal capacity and then applies a trickle charge to maintain that state.
The BC612 is designed as a charger station connected to either a PS1240 or PS2024 Battery Manager, expanding the Battery Manager’s charging capability to 6 batteries in parallel.
The motor starter switch is a small (~ 70 mm by 45 mm by 30 mm) sealed plastic box that contains an electronic replacement for the electro-mechanical starting winding switched found on 240 VAC electric motors up to 1.5 kW.
The PS2024 is designed as a 14.2 VDC/40A emergency vehicle battery charger and battery charge state monitor. The charger first applies a fast charge to bring the battery up to nominal capacity and then applies a trickle charge to maintain that state.
Upon reaching 10.5V (± 0.5V), thefloating contacts will close. These floating contacts can be used for both Normally Closed & Normally Open operation, making the LVC the ideal device to prevent excessive discharge of 12V battery sources.
C.M. Technology, pioneering switch mode power supplies design & development for over twenty-five years.