C.M. Technology offers a wide variety of lighting products which are technologically the most advanced available in the market using the latest LED technology combined with microprocessor control.
The PPS12 Power supply is a 240 VAC which generates up to 12 A at 13.8 VDC output voltage with a battery backup application. It uses a thermostatically controlled ball bearing fan to assist cooling.
The PPS20 is a 13.8 volt 20amp transformer isolated switch mode down converter designed to be used either as a stand alone supply or as a float style battery backed up supply when a lead acid battery is connected to its battery terminals.
The PS1240 is designed as a 14.2V D.C/40A battery charger and battery charge state monitor. The charger first applies a fast charge to bring the battery up to nominal capacity and then applies a trickle charge to maintain that state.
Our self-flashing lamps (no flasher can) utilise low-current Ultra Bright LEDs and are available as red, blue, white or amber lights. The flash rate and number of flashes can be selected at time of order.
The Emergency Vehicle Locker Light is a new concept in concealed lighting. A string of 18 very high brightness white LEDS are controlled by an infrared body heat detector.
The Emergency Exit Sign Type 1 is a small ( 195 mm x 116 mm x 30 mm) sign that uses the latest super bright Light Emitting Diodes (LED's) and a self contained Nickel-Metal-Hydride (NiMH) battery.
The Emergency Exit Sign Type 2 is a small (130mm by 40mm by 25mm) sign that uses the latest super bright Light Emitting Diodes (LED's) to backlight a red sign of the required size.
The Techno-Light is a self contained stainless steel and extruded aluminium battery pack with a sealed 7 amp hour 12 volt gel-cell, an inbuilt battery charger, a micro-processor based lamp controller and a white led auxiliary map reading lamp.
C.M. Technology, pioneering switch mode power supplies design & development for over twenty-five years.