The 504 has complete electronic over-voltage protection and is ideal for use with radios, mobile radios or CB radios.

The 505 has complete electronic over-voltage protection and is ideal for use with radios, mobile radios or CB radios.

The 1010 has complete electronic over-voltage protection and is ideal for use with radios, mobile radios or CB radios.

The 1525 has complete electronic over-voltage protection and is ideal for use with mobile radios, radio and hi-fi equipment and refrigerators, electric brakes, VHF (flying doctor) radios and marine radars.

The PSTR 7412 has been designed for locomotives with DC supplies ranging from 60 to 130 volts, without any voltage selection being needed.

The C.M.T. type 24 Telecommunication Power Supplies are DC to DC Converters designed to provide an isolated, regulated, overvoltage and transient protected 13.8 Volt source for radio and other ancillary equipment that is to be powered from the train DC supply.

The C.M.T. type 24 Telecommunication Power Supplies are DC to DC Converters designed to provide an isolated, regulated, overvoltage and transient protected 13.8 Volt source for radio and other ancillary equipment that is to be powered from the train DC supply.

The C.M.T. type 24 Telecommunication Power Supplies are DC to DC Converters designed to provide an isolated, regulated, overvoltage and transient protected 13.8 Volt source for radio and other ancillary equipment that is to be powered from the train DC supply.

The C.M.T. type 48 Telecommunication Power Supplies are DC to DC Converters designed to provide an isolated, regulated, overvoltage and transient protected 13.8 Volt source for radio and other ancillary equipment that is to be powered from the train DC supply.

The C.M.T. type 74 Telecommunication Power Supplies are DC to DC Converters designed to provide an isolated, regulated, overvoltage and transient protected 13.8 Volt source for radio and other ancillary equipment that is to be powered from the train DC supply.

The C.M.T. type 74 Telecommunication Power Supplies are DC to DC Converters designed to provide an isolated, regulated, overvoltage and transient protected 13.8 Volt source for radio and other ancillary equipment that is to be powered from the train DC supply.

The C.M.T. type 110 Telecommunication Power Supplies are DC to DC Converters designed to provide an isolated, regulated, overvoltage and transient protected 13.8 Volt source for radio and other ancillary equipment that is to be powered from the train DC supply.

The PPS12 Power supply takes 240V AC input and generates up to 12 A at 13.8 VDC output voltage, also including a battery manager application .

The PPS15 power supply Input 110 -  240V AC Input: 13.8V DC @ 15 A .

The PPS20 power supply Input 110 -  240V AC Input: 13.8V DC @ 20 A .

This desktop supply supplies 13.8v DC @8A, with a 1.5A battery charger circuit included, and a complete battery manager to monitor the battery voltage and disconnect it at 10.5v to stop deep discharge.

This product is designed as a vehicle battery charger and battery charge state monitor. While the vehicle is at its base or station, the charger is connected to the AC mains supply. An ignition interlock relay on the charger prevents the vehicle from starting when the AC mains is on.

This product is designed to give a 1 amp maximum 13.9 V precise voltage & current limit suitable for charging 12 volt nominal lead acid cells. When it reaches this accurate set point, the charger supplies a small trickle charge to maintain the battery. For sealed batteries, there can be no venting, as the current is precisely limited. For open cells, there is no out gassing. Therefore the charger cannot damage the battery. 

The 1525BA is ideal for constantly charging an auxiliary 12V lead acid battery from a 24 V DC source. Applications include tail gate lifters, caravan batteries and marine auxiliary batteries.

The BC 424 is an Australian designed and manufactured switch mode battery charger. This product is suitable for many industrial and automotive applications. Fire engines, Emergency vehicles etc... A robust product well designed for extreme conditions.

The BC 824 is an Australian designed and manufactured switch mode battery charger. This product is suitable for many industrial and automotive applications. Fire engines, Emergency vehicles etc... A robust product well designed for extreme conditions.

This desktop supply supplies 13.8v DC @8A, with a 1.5A battery charger circuit included, and a complete battery manager to monitor the battery voltage and disconnect it at 10.5v to stop deep discharge.

This product is designed as a vehicle battery charger and battery charge state monitor. While the vehicle is at its base or station, the charger is connected to the AC mains supply. An ignition interlock relay on the charger prevents the vehicle from starting when the AC mains is on.

The PS 2024 is an Emergency Vehicle Battery manager providing up to 20A at 24v, the PS 4012 provides up to 40A at 12v. There is an ignition cut-off switch and an under voltage alarm. This product is Australian designed, sturdy and robust. Ideal for fire engines, trucks and all other emergency vehicles.

The CPI has nominal Input : 110, 220, 230, 240 V AC @ 50/60 Hz. Output: 60, 72, 87 V nominal and field selectable @ 3, 6, 9, 12, 15, 22 A. 10+ A battery charger provided. All electronics exposed to the front. Alpha-numeric display with status monitoring outputs. Internationally connector system.

The FRR 9 easy to install. The FRR 15 also boasts the widest operating input window voltage on the market to date. Input: 155 to 280V AC, Output: 90V @ 9A.

The FRR 15 is easy to install. The FRR 15 also boasts the widest operating input window voltage on the market to date. Input: 155 to 280V AC, Output: 90V @ 15A.

The FRN 15 is durable for Australian conditions and simple to install, universal mount: pole, wall or strap. The FRN 15 also boasts the widest operating input window voltage on the market to date. Input: 155 to 280V AC, Selectable Output: 60, 72, 90V @ 15A.